Plastics Materials Chart From Technical Products, Inc.

PO Box 189
Hubertus, WI 53033
Phone: 262-335-3635
Fax: 262-335-3606
Email: tpi@technicalproductsinc.com

Plastic Material Property Data

Properties

Units

Test

Peek
Unfilled

Ultem®
1000

Torlon®
4203

Torlon®
4301

Vespel®
SP-1

Teflon® PTFE (Unfilled)

Delrin® AF PTFE-Filled

Nylon (Unfilled)

Poly- Carbonate

G-10

G-11

Ryton®
(Glass Filled)

P
H
Y
S
I
C
A
L

Density

^lb./in.³

^g/cm³

^D792

^0.047
^1.31

^0.046
^1.28

^0.051
^1.41

^0.052
^1.45

^0.051
^1.43

^0.078
^2.16

^0.054
^1.50

^0.042
^1.15

^0.043
^1.2

^0.065
^1.80

^0.061
^1.70

Water Absorption

^D570

^0.10

^0.25

^0.4

^{at 73ºF 0.24 at 48hrs at 122ºF 0.72}

^<0.01

^0.2

^0.3

^0.12

^0.10

^0.20

^0.02

M
E
C
H
A
N
I
C
A
L

Tensile Strength

^psi

^D638

^16,000

^16,500

^18,000

^12,000

^{at 73ºF 12,500}
^{at 500Fº 6,000}

^3,900

^8,000

^11,500

^9,500

^{lengthwise- 45,000}
^{crosswise- 38,000}

^{lengthwise- 43,000}
^{crosswise- 37,000}

^13,000

Tensile Modules

^psi

^D638

^500,000

^475,000

^600,000

^800,000

^80,000

^435,000

^425,000

^320,000

^730,000

Tensile Elongation at BreakTensile

^D638

²⁰

⁸⁰

¹⁰

^{at 73ºF 7.5}
^{at 500Fº 6.0}

³⁰⁰

¹⁵

⁵⁰

⁶⁰

^2.0

Flexural Strength

^psi

^D790

^25,000

^20,000

^24,000

^23,000

^{at 73ºF 16,000}
^{at 500Fº 9,000}

^{No Break}

^12,000

^15,000

^{lengthwise- 75,000}
^{crosswise- 65,000}

^{lengthwise- 80,000}
^{crosswise- 70,000}

^23,000

Flexural Modulus

^psi ^(Kpsi)

^D790

^600,000

^500,000

^600,000

^800,000

^{at 73ºF 450,000}
^{at 500Fº 250,000}

^72,000

^435,000

^450,000

^375,000

^{lengthwise- 2,700}
^{crosswise- 2,400}

^{lengthwise- 3,000}
^{crosswise- 2,700}

^1,000,000

Compressive Strength

^psi

^D695

^20,000

^22,000

^24,000

^22,000

^{10% strain at 73ºF 19,300}

^3,500

^16,000

^12,500

^12,000

^65,000

^63,000

^24,000

Compressive Modulus

^psi

^D695

^500,000

^480,000

^700,000

^950,000

^350,000

^70,000

^350,000

^420,000

^240,000

^1,300,000

Hardness, Rockwell (Shore D)

^D785

^M100

^{M112 / R125}

^M120

^M106

^E45-60

^D50

^{M85 / R115}

^{M70 / R118}

^M110

^M112

^{M94 / R125}

Izod Impact Noyched

^{ft. -lb./in.}

^D256

^1.0

^0.5

^2.0

^0.8

^3.5

^0.7

^0.6

¹³

^{lengthwise- 14.0}
^{crosswise- 12.0}

^{lengthwise- 12.0}
^{crosswise- 9.0}

^1.0

T
H
E
R
M
A
L

Coefficient of Linear Thermal Expansion

x10^-5 in./in./ºF

^D696

^2.6

^3.1

^1.7

^1.4

^3.0

^7.5

^5.00

^5.5

^3.9

^{lengthwise- 0.55}
^{crosswise- 0.66}

^{lengthwise- 0.72}
^{crosswise- 0.83}

^2.5

Heat Deflection Temp

^{at 264 psi Fº / ºC}

^D648

^{230 / 160}

^{392 / 200}

^{532 / 278}

^{534 / 279}

^{680 / 360}

^{132 / 55}

^{244 / 118}

^{200 / 93}

^{270 / 132}

^{490 / 254}

Melting Temperature

^{ºF / ºC}

^D3418

^{644 / 340}

^{419 / 215}

^{635 / 335}

^{347 / 175}

^{500 / 260}

^{293 / 145}

Maximum Operating Temp

^{ºF / ºC}

^{480 / 249}

^{340 / 171}

^{500 / 260}

^{180 / 82}

^{210 / 99}

^{250 / 121}

^{284 / 140}

^{329 / 165}

^{450 / 232}

Thermal Conductivity

^{BTU-in./ft.²-hr.-ºF x10 -4 cal/cm-sec-ºC}

^C177

^1.75
^6.03

^0.90
^3.10

^1.80
^6.20

^3.70
^12.8

^2.0
^6.9

^1.70
^5.86

^-
^-

^1.7
^5.9

^1.3
^6.9

^2.0
^7.0

^2.10
^7.23

Flammability Rating

^UL94

^V-0

^HB

^V-2

^{H-B / V-0}

^H-B

^V-O

E
L
E
C
T
R
I
C
A
L

Dielectric Strength

^{(V/mil) short time, 1/8" thick}

^D149

⁴⁸⁰

⁸³⁰

⁵⁸⁰

⁵⁶⁰

²⁸⁵

⁴⁰⁰

³⁹⁰

⁸⁰⁰

⁹⁰⁰

³⁸⁵

Dielectric Constant

^{at 1 MHz (60Hz)}

^D150

^3.30

^3.15

^4.2

^6.0

^3.55

^2.1

^3.1

^3.6

^3.17

^5.0

^4.5

Dissipation Factor

^{at 1 MHz (60Hz)}

^D150

^0.003

^0.0013

^0.026

^0.037

^0.0034

^<0.0002

^0.010

^0.02

^0.0009

^0.019

^0.020

Volume Resistivity

^{(ohm-cm) at 50% RH}

^D257

4.9 x 10¹⁶

6.7 x 10¹⁷

> 10¹⁶

> 10¹³

10^{14 -}10¹⁵

> 10¹⁸

^{3.0 X}10¹⁶

> 10¹³

10¹⁶

ARC Resistance

^(sec)

^D495

¹⁰⁰

¹²⁰

The information supplied is not to be taken as a warranty or representation for which Technical Products, Inc. assumes legal responsibility. It is offered solely for your consideration, investigation and verification. All risk of use, singly or in combination with other products, whether or not in accordance with the instructions, directions or suggestions is borne by the user.

Home

Ceramic Material Chart

Download a printer friendly version. (requires Adobe)

Want a copy of this material chart please call or send email we are happy to send you one.

Technical Products, Inc.
Fax your quote & prints-immediate attention to your quote!
P.O. Box 189 - Hubertus, WI 53033
262-335-3635, ext 20 - Fax 262-335-3606
www.technicalproductsinc.com - tpi@technicalproductsinc.com
©1976-2010 Technical Products, Inc. - All rights reserved
Last updated: 6/16/2010