Ryton® Glass Filled


Ryton offers exceptional dimensional stability, stiffness, compressive strength, and heat dissipation. Used in socket assemblies.

Material Specifications
Physical Properties Units Test Ryton® (Glass Filled)
Density lb/in.3
g/cm3		 D792 0.061
1.70
Water Absorption % D570 0.02
Mechanical Properties Units Test Ryton® (Glass Filled)
Tensile Strength psi D638 13,000
Tensile Modules psi
D638 730,000
Tensile Elongation at Break Tensile % D638 2.0
Flexural Strength psi
 D790 23,000
Flexural Modulus psi (Kpsi) D790 1,000,000
Compressive Strength psi D695 24,000
Compressive Modulus psi D695 1,300,000
Hardness Rockwell (Shore D) - D785 M94 / R125
Izod Impact Notched ft. - lb./in. D256 1.0
Thermal Properties Units Test Ryton® (Glass Filled)
Coefficient of Linear
Thermal Expansion 		10-5 in./in./°F D696 2.5
Heat Deflection Temperature at 264 psi °F/°C D648 490 / 254
Melting Temperature°F/°C D3418 -
Max. Use Temperature°F/°C - 450 / 232
Thermal Conductivity BTU- in./ft.2-hr.- °F
x10 - 4 cal/cm - sec. - °C		 C177 2.10
7.23
Flammability Rating - UL94 V-0
Electrical Properties

Units

Test

Ryton® (Glass Filled)
Dielectric Strength (V-mil) D149 385
Dielectric Constant at 1 MHz (60Hz) D150 -
Dissipation Factor at 1 MHz (60Hz) D150 -
Volume Resistivity (ohm - cm) at 50% RH D257 -

The information supplied is not to be taken as a warranty or representation for which Technical Products, Inc. assumes legal responsibility, is offered solely for your consideration, investigation and verification. All risk of use, singly or in combination with other products, whether or not in accordance with the instructions, directions or suggestions is borne by the user.